HCO NX50 - Manual (Page 10)

10
ADDITIONAL INFORMATION
TRANSFERRING PICTURES AND VIDEO TO A COMPUTER:
Pictures and video can be removed in one of two ways:
1. SD memory card can be removed from camera (ALWAYS ensure camera is OFF
before removing SD card) and transferred to computer or SD card reader.
2. Connect camera to computer using supplied USB cable.
i. Turn camera ON
ii. Computer will recognize camera and prompt you to open file or save pictures
MOUNTING CAMERA:
This camera is designed to use the UWAY Bracket (sold separately) to obtain maximal mounting
versatility. Camera can be securely locked with cable lock (through camera, bracket, or both) or
security box (with or without bracket).
Use the „Live Preview‟ mode while mounting camera to ensure your target area is in the field of view.
Camera can be mounted with nylon strap (included) or security box (sold separately).
It is recommended to mount the camera 3-4 feet high overlooking desired area and 20-30 feet away
from target area for maximum sensitivity in most situations. Adjustments may be required depending
on game size and environment. PIR motion detection distances change based on ambient
temperature and setup. Higher ambient temperatures will reduce PIR motion detection range thereby
requiring camera to be closer to desired location.
Angle the camera perpendicular to the ground to maximize the IR lighting potential. Using UWAY
Bracket provides optimal versatility when mounting the camera. UWAY XtendIR will significantly
increase night IR lighting distances out to 60-100 feet.
FIRMWARE UPDATES
This camera is designed to accommodate future firmware updates if required.
1. Copy the firmware update file (eg. Main.elf) onto the SD card root directory (do not place in
any file)
2. Insert SD card into the camera
3. Turn camera ON
4. Select YES and push OK when update prompt appears
5. The blue LED will continue blinking until the update is finished.
6. Turn camera OFF and open battery door after blue LED stops blinking
7. Replace battery door and turn camera ON
8. Select NO to update and push OK
9. The update file will be removed from SD card
10.
Confirm new firmware version by checking „Camera Information” (see instructions)