HF scientific Micro200BW Turbidimeter - 0 -1000 NTU - Manual (Page 33)

Page 19
MICRO 200 BW 0 - 1000 NTU (5/05)
Rev. 3.1
d. Comm Port
This is the communications or serial port menu. This menu will have no purpose unless you have one of the optional serial ports
installed. See page 35 for more details.
Selection Options:
F1: Selects the baud rate between 300, 600, 1200, 2400, 4800 & 9600
F2: Selects the address from 0 to F, HEXADECIMAL
F3: Selects serial printer mode on & serial printer mode off
F4: Used to change access code
F5: Not Used
F2
F3
ALARM
F5 F4
MENU
F1
Comm Port Menu
Set Baud 9600
Set Address 0
Select Printer
Printer Off
Access Code Reporting
Menu 4 Hour
e. Access Code Menu
To enter to this menu, you first need to enter an access code. If no previous code has been entered, the master code F1, F4, F3,
F5 may be used.
Selection Options:
F1: Not Used
F2: Toggles between Access code off and Access code on
F3: Used to select a new Access Code
F4: Not Used
F5: Not Used
F2
F3
ALARM
F5 F4
MENU
F1
Access Code Menu
Access Code
Off
Change Code