Setting the year, Setting the day and month, 3 setting the day and month – HF scientific 19944 Triple Validation Turbidimeter - 0-100 NTU User Manual
Page 22
TVT2 (5/02)
Rev. 1.7 (.pdf)
17
Change the resolution by pressing the
t or u button. When you have selected the
desired digit resolution press the
↵ button. After pressing the ↵ button, the YEAR block
will be highlighted and the current year will be displayed
8.2 Setting the Year
With the YEAR block highlighted and the year displayed, change the displayed year
using the
t or u buttons. When you have selected the proper year press the enter
button (
↵) to accept the year.
8.3 Setting the Day and Month
After pressing the
↵ button, the DAY:MONTH block will be displayed and you will see
two numbers on the upper LCD screen. The number flashing corresponds to the month.
Select the correct month by pressing the
t or u button to change the displayed month.
When you have selected the proper month, press the
↵ button. After pressing the ↵
button, the second number on the upper LCD screen will start to flash: this number
corresponds to the day of the month.