Setting the time, 4 setting the time – HF scientific 19944 Triple Validation Turbidimeter - 0-100 NTU User Manual
Page 23
TVT2 (5/02)
Rev. 1.7 (.pdf)
18
Select the correct day by pressing the
t or u buttons to change the displayed day.
When you have selected the proper day, press the
↵ button.
8.4 Setting the Time
After pressing the
↵ button, the TIME block will be displayed and you will see the time
displayed on the upper LCD screen in 24-hour format. The number flashing corresponds
to the hour.
Select the correct hour by pressing the
t or u button to change the displayed hour.
When you have selected the proper hour, press the
↵ button. After pressing the ↵ button,
the second number on the upper LCD screen will start to flash: this number corresponds
to minutes.
Select the correct minutes level by pressing the
t or u button to change the displayed
minutes. When you have selected the proper minute’s level, press the
↵ button.