JK Audio BlueKeeper - Manual (Page 17)

17
Connecting to a Bluetooth Device
When bonding is complete, the blue LED will flash at a rate of 1 sec
on, 2 sec off. Once BlueKeeper has been added to your cell phone,
subsequent connections can be made more quickly from Idle mode.
When the unit is placed in Idle mode, it will search its connection
history and automatically connect to the last device that is available.
To disconnect your cell phone, select the Drop function on your
phone’s Bluetooth menu, power off your phone or the BlueKeeper,
or take the cell phone out of the 15’ range. If left unused in Idle
Mode for 5 minutes, BlueKeeper will automatically disconnect.
To clear the connection history and return to factory reset, hold the
Drop button in for at least 12 seconds. After resetting, the
BlueKeeper will return to pairing mode.
Bluetooth LED pattern after Bonding
Bonded
2 seconds off, 1 second on
Idle Mode
2 sec off, 200 ms on
Initialize
2 sec off, 2 sec on
Bluetooth LED pattern to initiate Bonding
Pairing Mode
100 ms off,
100 ms on
Hold Bluetooth Call/Pair button in at least
3 sec to reach Pairing Mode the first time
a new device is connected,
<1 sec thereafter to easily
connect from Idle Mode
Figure 8: Bluetooth LED Patterns