JK Audio BlueKeeper - Manual (Page 6)

6
Features—Front View
Figure 1: Front View
1 2 3 4 5 6 7
8 9
10 11
1. Call Button - Press this button to initiate Bluetooth Idle or Pair-
ing mode, redial an outgoing call or accept an incoming call.
2. Drop Button - Press this button to drop (hang up) a call.
3. Send 1 Level - Adjusts the signal level that you are sending out
to the cell phone through the female XLR input.
4. Send 2 Level - Adjusts the signal level that you are sending out
to the cell phone through the 3.5mm mini jack input.
5. Caller Level - Adjusts the level of the incoming audio as it is
going out the output jacks.
6. Headphone Level - Adjusts the signal level coming from the
3.5mm front panel headphone jack.
7. Headphones - The 3.5mm stereo headphone jack contains a
mix of both the Send input audio and the Caller audio.
8. Blue LED - Indicates Bluetooth status, lit steady when you are
on line with a call or flashes to show pairing status.
9. Send LEDs - Displays the signal level going to the phone call.
10. Power LED - Lit when unit is plugged in and receiving power.
11. Caller LEDs - Displays the signal level coming in from the
phone call, after the DSP. This signal level will not change
when you adjust the Caller knob.