Manual operation – Kino Flo Imara S10/S6 DMX User Manual
Page 11
Advertising
11
Manual Operation
IMARA S10 has 5 manual LAMP SELECT switches. Each switch turns on/off lamps in
sets of 2. See diagram below for lamp switching sequence.
IMARA S6 has 3 manual LAMP SELECT switches. Each switch turns on/off lamps in
sets of 2. See diagram below for lamp switching sequence.
IMARA S6 Lamp Sequence
The onboard dimmer dial can manually dim lamps.
2
2
4
4
6
6
8
10
IMARA S10 Lamp Sequence
Note: All manual controls are disabled as soon as the
DMX cable is applied. For Manual control with DMX cables
plugged in, set address to “000”.
There is a 5 second delay when switching between DMX and
Manual control.
Advertising