Kino Flo Imara S10/S6 DMX - Manual (Page 6)

6
Position the Top and Bottom Doors. Align the three thumbscrews with the
receptacle holes in the fixture and insert into place. Lock the barndoors by
turning the silver thumbscrew. To remove, reverse the procedure.
Applying Gel to Frame
Mounting Barndoors
Option 1 – The Gel Frame comes with Gel Clips. Cut the gel to size and use the
Clips to fasten the gel to the Frame. Note: It is recommended to attach one clip
on all four sides and two clips near all four corners of the Gel Frame.
Option 2 – Apply transfer tape directly to the Gel Frame. The clips are not neces-
sary when taping the gel.
Position the Side barndoors alongside the side edge of the fixture. Align the
thumbscrew with the receptacle hole in the fixture and insert into place. Lock the
barndoors by turning the silver thumbscrew. To remove, reverse the procedure.
Top & Bottom Doors
Side Doors