Kino Flo Imara S10/S6 DMX - Manual (Page 5)

5
Inserting Louver or Gel Frame
The Imara includes spring
loaded accessory holders and
two channels to hold the
Gel Frame and Honeycomb
Louver.
Place the long edge of the
Gel Frame Louver into the
lower channel. Press down
on the left and right corners
and slip the upper edge into
the upper channel. To remove,
reverse the procedure.
Note: Do not press down
along the top center portion
of the Gel Frame or Louver.
Doing so may deform the
Gel Frame or Louver over
repeated usage.
Inserting Lamps
Open hinged reflector
door.
Close reflector door.
Insert lamp base into
lamp connector.
To release lamps, press red button and lift lamp base out.
Insert lamp tip into lamp
clip.