Inserting gel frame inserting lamps – Kino Flo ParaZip 400/200 DMX User Manual
Page 4
Advertising
4
Inserting Gel Frame
Inserting Lamps
Remove gel frame.
Insert lamp tip first.
Snap lamp base into
lamp connector.
Remove the lamp base
cover by pulling up on the
two push-buttons.
The Gel Frame is secured to the fixture by 4 spring-loaded pins. Align the pins of the
Gel Frame with the oval receptacle holes on the edge of the fixture. Pull back the pins and
release into the receptacles to properly secure the Gel Frame.
To release lamps,
press red button and lift
lamp base out.
Replace lamp base cover
and push down on pins to
lock.
Advertising