Kino Flo ParaZip 400/200 DMX User Manual
Page 5
Advertising
5
Inserting Louver
Mounting Barndoors
Applying Gel to Frame
A
B
A) The Gel Frame comes
with Gel Clips. Cut the gel
to size and use the clips to
fasten the gel to the frame.
B) Another method is to
apply transfer tape directly
to the gel frame. The clips
are not necessary when
taping the gel.
Place the long edge of the Louver into the lower channel containing a set of leaf springs.
Press down on the Louver and slip the upper edge of the louver into the upper channel of
the fixture. Honeycomb louvers have tabs on the side to enable easy handling. To remove,
reverse the procedure.
Adjust the door tension with
a Phillips screwdriver.
Attach the Barndoors (sold separately) to the two receptacles
located along the top and bottom edge of the fixture.
Advertising