Kino Flo ParaZip 400/200 DMX - Manual (Page 6)

6
ParaZip Yoke Mount
The Yoke has a ½” hole to accept industry standard mounting
hardware.
The ParaZip 400 Yoke Mount can hang from a grid by a junior
pipe hanger using a Junior Pin Assembly for Yoke (MTP-I80),
sold separately.
The ParaZip 200 Yoke Mount can also hang from a grid by a
junior pipe hanger using a Junior Pin Assembly for Yoke
(MTP-I80) or by a baby pipe hanger using a Baby Receiver
Assembly for Yoke (MTP-I40) also sold separately.
Note: Because of weight capacity,
the MTP-I40 can only be used on the
ParaZip 200.
The ParaZip 400 and 200 Pole-Op include a yoke with an
attached junior pin. They can be hung from a grid with a
junior pipe hanger.
MTP-I80 MTP-I40
Warning: Use only M5 X 10mm screws (supplied) to assemble yoke. Note that threads on
the fixture are self-locking and may seem tight. Replacement screw: Part No. 2020127
Recommended torque setting:
USA: 18 lb-in
Metric: 2 Nm
ParaZip Pole-Op
Junior pin attached to Pole-Op Yoke