Krell 707 Evolution User Manual
Page 12
ADDITIONAL MENU
CONFIGURATION,
continued
To save the settings that you have configured, or to retrieve settings that you have saved,
follow these steps:
SAVE CUSTOM SETTINGS
Press and hold the save button (36) on the front panel for approximately four seconds. The
front panel displays
SAVING SETUP
while the settings are stored in nonvolatile memory.
RECALL CUSTOM SETTINGS
Press and hold the recall (37) button for approximately four seconds. The front panel dis-
plays
RECALL SETUP
while the settings are being retrieved from nonvolatile memory. Any set-
tings that are saved are available using this recall procedure.
RESTORE FACTORY DEFAULT SETTINGS
1. Press the front panel power button (1) to put your system into the operational mode.
2. Simultaneously press the recall button (37) and the power button (1). The following
phrases appear in the front panel display:
PLEASE WAIT INITIALIZING
.
The customized settings
revert to the factory default settings.
Contact Krell at 203-298-4000 or [email protected] if you need more information
about the Evolution 707 and its setup menus.
SAVE/RECALL
CUSTOM SETTINGS
Restore Factory Settings
Contact Krell
MODEL
SERIAL NUMBER
P/N 310206
v 08.0
© 2008 by Krell Industries, Inc. All rights reserved. Krell
®
is a registered trademark of Krell Industries, Inc., and is restricted for use by Krell Industries, Inc., its subsidiaries, and authorized agents. Evolution
CAST
TM
is a trademark of Krell Industries, Inc. “DTS”, “DTS Digital Surround”, “DTS ES Extende
d
Surround”, and “Neo:6” are registered trademarks of Digital Theater Systems, Inc. "Dolby," "Pro Logic,"
and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. Copyright 1992–1997 Dolby Laboratories, Inc. All rights reserved. HDMI, the HDMI logo and High-
Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. All other trademarks and trade names are registered to their respective companies.