Krell 707 Evolution User Manual
Page 8
8
Krell Evolution 707
Calibration Screen
The
CALIBRATION SCREEN
appears. After a short period of time, the calibration process
begins.
While the Evolution 707 is in
the calibration mode, you
hear white noise unless mute
(38) is active. When the white
noise stops, the calibration
process has ended. Other
functions of the component
are inactive until calibration is
complete.
Select
RUN ALL.
This selection enables the Evolution 707 to obtain basic information about
the loudspeakers connected to your system.
RUN ALL
The
RUN ALL
function finds and sets all subwoofers connected to your system to
ALL.
You
need to re-set each subwoofer for its required purpose.
AUTO ROOM EQ
Once
AUTO ROOM EQ
is set, the parameters cannot be altered or trimmed. Device EQ is a
separate function, found in the CONFIGURE DEVICES section of the menu.
Press the previous button or key to return to the
LISTENING ROOM SETUP
screen. Select
MANUAL SETUP
from the
LISTENING ROOM SETUP
screen. The
SPEAKER MAIN MENU
screen
appears.
Select
CALIBRATE SPEAKERS from the MANUAL SETUP MENU screen. T
he
SPEAKER SETUP
screen appears.
Speaker Main Menu
Automatic Setup Screen