Krell 707 Evolution - Manual (Page 5)

Krell Evolution 707 5
ANALOG AUDIO
OUTPUTS AND INPUTS
44 Evolution CAST Inputs
45 Evolution CAST Outputs
46 Balanced Inputs
One set of balanced inputs
with XLR connectors.
47 Balanced Outputs
Eight balanced analog audio
channel outputs, with XLR
connectors, for the left, center,
subwoofer, surround left, sur-
round right, back left, and
back right.
48 Single-ended Inputs
Seven sets of single-ended
inputs with RCA connectors.
49 Single-ended Outputs
Eight single-ended analog
audio channel outputs, with
RCA connectors, for the left,
center, right, subwoofer, sur-
round left, surround right,
back left, and back right.
50 7.1 Audio Inputs
Eight single-ended 7.1 inputs
for multi-channel SACD and
DVD audio devices. These
inputs are analog pass-
through inputs.
51 Tape In Left and Right
One set of single-ended tape
inputs with RCA connectors.
52 Tape Out Left and Right
One set of single-ended tape
outputs with RCA connectors.
53 VCR In Left and Right
One set of single-ended
inputs with RCA connectors,
for a VCR audio source.
54 VCR Out Left and Right
One set of single-ended out
puts with RCA connectors,
for a VCR audio source.
DIGITAL AUDIO INPUTS
AND OUTPUTS
55 Toslink Optical Input
Four optical digital EIAJ inputs
with TosLink connectors.
56 Toslink Optical Output
One optical digital EIAJ output
with TosLink connectors.
57 Coaxial Inputs
Four coaxial digital audio
inputs with RCA connectors.
58 Coaxial Outputs
One digital coaxial output with
an RCA connector.
59 Krell Digital I/F
Krell-proprietary link.
VIDEO INPUTS AND
OUTPUTS
Note: On screen display (OSD) is
available from all outputs. See
also HDMI TM Input and Output
Considerations, on page 6.
60 S-video Inputs
Four S-video inputs with DIN
connectors.
61 S-video Main Output
One S-video output with DIN
connectors.
62 S-video Zone 2 Output
One S-video output with DIN
connectors.63 Composite
Video Inputs
Four RCA composite video
inputs with RCA connectors.
64 Composite Video Main
Output
One composite video output
with RCA connectors.
65 Composite Video Zone 2
Output
One composite video output
with RCA connectors.
66 Component Video Inputs
Three sets of component
video inputs. Component
video conveys the video sig-
nal using three wires, labeled
Y, Pr, and Pb on the back
panel. These inputs are com-
patible with all wideband
video sources.
67 Component Video Main
Output
One set of component video
outputs via a RCA connector.
68 Component Video Zone 2
Output
One set of component video
outputs.
69 HDMI TM Inputs
Four HDMI TM video inputs.
70 HDMI TM Outputs
One HDMI TM video output.
BACK PANEL
REMOTE CONTROL
71 12 VDC In and Out
Four programmable 12 V out-
puts and one input. Sends a
12 V power on/off signal via a
12 V trigger cable to other Krell
components and to other
devices that incorporate 12 V
power on/off trigger input.
When the Evolution 707 is in
the operational mode and a
trigger is enabled, the 12
VDC Out provides 12 V of DC
output. When the Evolution
707 is in the stand-by mode
or off, or if a trigger is not
enabled, the DC output is 0 V.
Note: Trigger 1 is enabled for
all 10 devices.
72 Comm Port RS-232
Connector
Sends operational instruc-
tions directly to the Evolution
707 using an external com-
puter control system.
73 RC-5 In
Makes custom installation
easy and secure by accept-
ing baseband RC-5 input
commands from hardwired
remote controllers.
74 Link Control
Two proprietary Krell connec-
tors, used exclusively for
communication with other
Krell components in your
syste m.
POWER
CONNECTIONS
75 Back Panel Power Switch
Switches the Evolution 707
from off to stand-by.
76 IEC Connector
A standard IEC power con-
nector, for use with the AC
power cord.
BACK PANEL
CONNECTIONS