Krell Phantom II Manual - Manual (Page 12)

12
Placement
Before you install an Phantom II preamplifier into your system, please follow the
guidelines in this section to select a location for your component. This will facili-
tate a clean, trouble-free installation.
The Phantom II preamplifier does not require a special rack or cabinet for installa-
tion. The preamplifier chassis measures 17.3 in. (43.8 cm) wide, 3.8 in. (9.7 cm)
high, and 18.3 in. (46.4 cm) deep.
The Phantom II preamplifier requires at least two inches of clearance on each side,
and at least two inches of clearance above the component to provide adequate
ventilation. Installation inside cabinetry may require additional ventilation.
AC Power Guidelines
The Phantom II preamplifier has superb regulation and does not require a dedicat-
ed AC circuit. Avoid connections through extension cords or multiple AC adapters.
High quality 15 amp AC strips are acceptable.
(SECTION TWO: Unpacking and Placement continued)