Krell Phantom II Manual - Manual (Page 42)

42
Theater Mode
This function enables you to select theater mode volume for a particular input.
Use this function when connecting the output of a preamp/processor to the
Phantom II for home theater applications. Configuring an input for theater mode
sets that input for unity gain and suspends the level control of the Phantom II.
Volume adjustments are then made through the preamp/processor connected to
the input configured for theater mode on the Phantom II. The options are: ON, OFF.
Enter the menu, then:
1. Use the level control knob on the preamplifier front panel or the up and down
keys (14) on the remote control to select THEATER.
2. Press the enter button on the preamplifier front panel or the enter key (6) on
the remote control . The front panel display (3) shows the default input: B-1 .
3. Use the level control knob or the up and down keys to select the desired input:
B-1, B-2, S-1, S-2, S-3, C-1, C-2, or TAPE.
4. Press the enter button or key. The front panel display shows the default mode:
OFF .
5. Use the level control knob or the up or down keys to select ON or OFF.
6. Press the enter button or key to confirm the selection and return to the select-
ed input.
ON
The selected input is set to THEATER and the volume control for the theater input is
disengaged on the Phantom II.
OFF
The selected input is configured normally and the volume control for the normal
input is engaged on the Phantom II.
Note
Only one input on the Phantom II can be in theater mode at a time. When theater mode is
set for an input, theater mode is cleared automatically from other inputs.
The Phantom II selects the theater input automatically upon power on, if the input trigger is
configured for THEATER . See Input Trigger, on pages 35-36.
continued