LandAirSea GPS Tracking Key Pro User Guide - Manual (Page 34)

LandAirSea Tracking Key/Pro ® User Guide
LandAirSea, Inc | User Guide 2010 34
S
ETTING
GPS S
AMPLING
R
ATE IN
P
AST
T
RACK
Your GPS device is set to sample the GPS satellites every 1 second. You can increase the sampling rate,
but not to any rate greater than 5 seconds.
First, assure that Past Track has found your device. In the Past Track menu choose Setup/Setup Device
and click on ‘Find Unit”
Choose OK to exit the Find Unit screen. When you return to the Setup Device screen, choose Advanced
This will open the Advanced screen below. Go to the Sampling Rate field and set the sampling rate. (Do
not set the sampling rate above 5 seconds.) The device will now be set at the rate which you have
chosen. Past Track will set the sampling rate but will not read the sampling rate, so do not be confused
when you go back into the Advanced screen and the sampling rate is still at 1 second. The sampling rate
displayed in the Advanced screen will always default to 1 second, even though the sampling rate on the
device has been changed.