Pantum P3205D - Manual (Page 3)

II
Safety Precautions
Laser Safety
Laser radiation is harmful to the human body. Since the laser components are completely
sealed within the printer, laser radiation will not leak. To avoid laser radiation, please do not
disassemble the printer at discretion!
The printer follows the provisions of Class 1 laser products under CFR standard. The printer has
an integrated Class III B laser diode, which does not emit radiation among laser components.
The following label is attached to the laser components inside the printer.
Safety Warning
Please note the following safety warnings before using the printer:
There is a high-voltage electrode inside the printer. Before
cleaning the printer, make sure the power is turned off!
Plugging and unplugging the power cord plug with
a wet hand may result in an electric shock.
The fuser unit bears a high temperature warning
label. Please do not remove or damage this label.
The fuser unit is hot during and after
printing. Touching the fuser unit (the
shaded area as shown) may cause burns!
Warning