Pantum P3205D - Manual (Page 60)

8-6
4. Remove the jammed paper and close the fuser door and the rear cover, then the printer will
automatically resume printing.
8.1.5. DUPLEX UNIT JAM
1. Remove the duplex printing unit from the back of the printer.
2. Remove the jammed paper from the duplex unit.
3. If the paper does not come out along with the duplex unit, open the tray and remove the
jammed paper directly from the bottom.
4. After clearing the jam, reload the duplex unit, check other parts of the printer, ensure that
there is no jammed paper, and close the front cover, then the printer will automatically resume
printing.
1
2