Beyonwiz DP-S1 - Manual (Page 43)

Quick Setup
33
2) W-LAN Configuration
After select an AP, you have to configure wireless LAN interface;
z Network Type: you have to specify the type of the device which the
DP-S1 communicates with. If you connect your DP-S1 with a router,
please set the “Network Type” as “Infrastructure”. If you connect your
DP-S1 with a PC, please set the “Network Type” as “Ad-hoc”.
z Authentication Type: This is a more secure and safer connection
between the DP-S1 and the router as they authenticate each other
before communicating. Make sure it’s set the same as the
authentication type of the router.
z Encryption Type: If this option is set, the DP-S1 will communicate
with your router by encrypting the data. So, you can get a secure
communication channel. Please set this the same as the encryption
type of your router.
z
Key: Some authentication and encryption types require a key. Please
set the key same as your router.
The DP-S1 supports all security features which are most commonly
supported in wireless routers to ensure the compatibility with wireless
routers. You can set this configuration on the setup menu. Before you
set this, be sure that you configure your wireless router.