Beyonwiz DP-S1 - Manual (Page 47)

Quick Setup
37
1) Set as WizPNP Client
You can set the DP-S1 as a WizPNP client; please select the “Client”
menu with the OK button and select “Enable” with the OK button. You
can also disable the WizPNP client function by selecting “Disable” with
the OK button.
2) Set as WizPNP Server
You can set the DP-S1 as a WizPNP server; please select the “Server”
menu with the OK button and select “Enable” with the OK button. You
can also disable the WizPNP server function by selecting “Disable” with
the OK button.
The following options will be enabled to set if you enable the WizPNP
server function;
z
Name: this name is used to indicate the WinPNP server.
z
Port: this is 5-digit number, which has maximum value as 65534.
Please do not change this as long as the DP-S1 works properly.