Reloop IQ.2+ USB - Manual (Page 24)

DESIGNATIONS LCD INFO DISPLAY -13-
I. ..............Channel assignment indicator
II..............BPM indicator
III.............X parameter indicator
IV.............Y parameter indicator
V..............Effect selection indicator
CONNECTIONS
1. Connect your line sources (CD players, MD players, etc.) and your turntables
via the inputs for channels A + B -31-. If you wish to connect turntables to the
phono inputs make sure to put the phono/line switch(es) -30- to the “PH”
position; when connecting line sources to these inputs you have to put the
phono/line switch(es) -30- to the “LN” position.
ATTENTION!
Please always make sure that the device is turned off when using the
phono/line switches -30-.
2. Connect the grounding cables of your turntables with the GND grounding
screws of your mixer -29-.
3. Connect your microphone to the microphone input -39-.
4. Connect your headphones via the headphones input 1 -44- (6.3 mm jack).
Alternatively or if required you can connect a second pair of headphones
with the headphones input 2 -45- (3.5 mm jack).
24
ENGLISH
II
I V
IV
III
IM_IQ2.qxp 10.07.2008 14:28 Uhr Seite 24