Reloop KEYPAD - Instruction Manual - Manual (Page 8)

8
ENGLISH
Congratulations on purchasing Reloop Keypad. Thank you for placing your trust in our disc jockey technology.
Before operating this equipment we ask you to carefully study and observe all instructions.
Please remove the Reloop Keypad from its packaging. Check before initial operation to make sure that the device has not been
visibly damaged during transport. If you detect any damage to the included cables or the casing, do not operate the device.
Contact your specialised dealer.
SAfETY INSTRUCTIoNS
CAUTIoN!
Please exercise particular caution when handling 240 V power voltage. This voltage rating may lead to a
critical electrical shock! Any damage caused by the non-observance of this operation manual excludes any
warranty claims. The manufacturer is not liable for any damage to property or for personal injury caused by
improper handling or non-observance of the safety instructions.
- This device left the factory in perfect condition. To maintain this condition and to ensure a risk-free operation, the user must
observe the safety instructions and warnings contained in this operation manual.
- For reasons of safety and certification (CE) the unauthorised conversion and/or modification of the device is prohibited. Please
note that in the event of damage caused by the manual modification to this device any warranty claims are excluded.
- The inside of the device does not contain any parts which require maintenance, with the exception of wear parts that can be
exchanged from the outside. Qualified staff must carry out maintenance, otherwise the warranty does not apply!
- The fuse must be exchanged exclusively against fuses of the same class, with the same trigger features and nominal current rating.
- Ensure that the power will only be supplied after the device has been fully set up. Always plug in the mains plug last. Ensure that
the mains switch is in the “OFF” position when connecting the device to power.
- Only use cables that comply with regulations. Observe that all jacks and bushes are tightened and hooked up correctly. Refer
to your dealer, if you have any questions.
- Ensure that when setting up the product the mains cable is not squashed or damaged by sharp edges.
- Prevent the mains cable from coming into contact with other cables! Exercise great care when handling mains cables and
connections. Never touch these parts with wet hands!
- Connect the power cable to appropriate shock-proof outlets only. The only supply point to be used is a supply outlet in accor-
dance with specifications of the public supply network.
- Disconnect the device from the supply outlet when not in use and before cleaning! Be sure to hold the mains plug by the body.
Never pull the mains cord!
- Position the device on a horizontal and stable low-flame base.
- Avoid any concussions or violent impact when installing or operating the device.
- When selecting the location of installation make sure that the device is not exposed to excessive heat, humidity, and dust. Be
sure that no cables lie around openly. You will endanger your own safety and that of others!
- Do not rest any containers filled with liquid that could easily spill onto the device or in its immediate vicinity. If, however, fluids
should access the inside of the device, immediately disconnect the mains plug. Have the device checked by a qualified service
technician before re-use. Damage caused by fluids inside the device is excluded from the warranty.
- Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C) conditions. Keep the device
away from direct exposure to the sun and heat sources such as radiators, ovens, etc. (even during transport in a closed vehicle).
Never cover any cooling fan or vents. Always ensure sufficient ventilation.
- The device must not be operated after being taken from a cold environment into a warm environment. The condensation
caused hereby may destroy your device. Do not switch on or operate the device until it has reached ambient temperature!
- Controls and switches should never be treated with spray-on cleaning agents and lubricants. This device should only be cle-
aned with a damp cloth. Never use solvents or cleaning fluids with a petroleum base for cleaning.
- When relocating, the device should be transported in its original packaging.
- Devices supplied by voltage should not be left in the hands of children. Please exercise particular care when in the presence of children.
- At commercial facilities the regulations for the prevention of accidents as stipulated by the organization of professional asso-
ciations must be observed.
- At schools, training facilities, hobby and self-help workshops the operation of the device must be monitored with responsibility
by trained staff.
- Keep this operation manual in a safe place for later reference in the event of questions or problems.