Revel C30 - Manual (Page 4)

Figure 2. The REVEL PER-
FORMA C30 transducer and
connection locations.
DESCRIPTION
The REVEL PERFORMA C30 loudspeaker uses two 6.5-inch
(165 mm) inverted magnesium/aluminum-alloy dome woofers, a
4-inch (102 mm) inverted magnesium/aluminum-alloy dome
midrange, and an aluminum-alloy dome 1-inch (25 mm) tweeter.
Combined with an individually-optimized crossover network, this
transducer arrangement provides a uniform “listening window” or
area in which the sound varies little. The dual high power-handling
woofers and high-order crossover networks assure an extraordinary
dynamic range capability with very low dynamic compression. Full
magnetic shielding allows use near a video monitor.
WOOFERS
The two 6 .5-inch (165 mm) woofers feature:
• 1.5-inch (38 mm) diameter voice coils wound on Kapton
bobbins for unsurpassed dynamic capability and freedom
from compression.
• Fully-pistonic operation throughout their entire operating
range, with inverted magnesium/aluminum alloy diaphragms
for low coloration and distortion.
• Large 26-ounce (0.737 kg) magnet system with optimized cir-
cuits for vanishing low distortion.
• Die-cast basket to eliminate coloration from resonances.
MIDRANGE
The 4-inch (102 mm) midrange features:
• 1.5-inch (38 mm) diameter voice coil on a Kapton ® former for
extraordinary power handling and freedom from distortion.
REVEL PERFORMA C30
Owner’s Manual
4
On Top of
Monitor Flush Mounted Stand
Mounted 0 +.5 -.5 +1 -1
Placement
Compensation
(See Owner's Manual) High Frequency
Level (dB)
Revel
Northridge, California
Made in U.S.A.
Serial No.
REVEL PERFORMA
C30 Front (without grille)
REVEL PERFORMA
C30 Rear
Woofer
Tweeter
Woofer High-Frequency
Level Control Placement
Compensation
Control
Midrange
Connector Connector