Revel C30 - Manual (Page 9)

Figure 7. Installing feet
and spikes.
Figure 8. Installing the
assembled REVEL
PERFORMA PEDESTAL 2
onto the REVEL PERFORMA
C30 loudspeaker.
4. Place the stand (as shown below) and install the feet (from
Step 1) onto the bottom of the ‘T’ base. Thread spikes about
halfway into each foot and use the wrench to tighten each one
with a locking nut, as shown in Figure 7.
5. Place your Revel Performa C30 loudspeaker as shown onto a
carpeted surface or soft towel. Attach the assembled stand with
four 8-32 x 3⁄4" flat head screws, as shown in Figure 8. Turn the
unit upright. Make final placement and spike adjustments.
REVEL PERFORMA C30
Owner’s Manual
9
7⁄ 8" max.
Lock Nut
HARD FLOORS
round end
Cover
(optional)
Foot
Spike
Lock Nut
CARPETED FLOORS
spike end
Foot
1 1⁄ 8" max.
Spike (3) Feet
(6) Screws
(for Feet)
(3) Spikes
(3) Covers
(optional)
(3) Nuts
Revel
Performa
C30
Revel Performa
Pedestal 2
(Assembled)
(4) 8-32 x 3 ⁄4"
Flat Head Screws
(Start All Screws
Before Tightening)