Revel C30 - Manual (Page 5)

• Fully-pistonic operation throughout its entire operating range,
with an inverted magnesium/aluminum-alloy dome for
extremely low coloration and distortion.
• Neodymium motor derived from the REVEL ULTIMA
SALON ® midrange transducer.
• Die-cast basket to eliminate coloration from resonances.
TWEETER
The 1-inch (25 mm) tweeter features:
• An aluminum-alloy dome for fully-pistonic operation.
• Ferrofluid magnetic cooling for high power handling and low
dynamic compression.
• Large co-polymer surround for linear operation over a wide
dynamic range.
CROSSOVER NETWORK
The REVEL PERFORMA C30 crossover is expertly designed to
seamlessly integrate the transducers over a wide listening area, and
to compensate for a wide range of listening environments. The
crossover features:
• A 3-way, high-order crossover at 280 Hz and 2.5 kHz for high
power handling, optimized dispersion, and freedom from dis-
tortion and dynamic compression.
• Individual calibration to match each REVEL PERFORMA
C30 to the original reference standard.
• 3-position placement compensation switch for low coloration
under a wide range of conditions.
• Calibrated high-frequency level control for accurate,
repeatable settings.
• Separate woofer, midrange, and tweeter crossover boards to
eliminate any distortion-causing interaction.
CABINET
The cabinet is constructed of 0.75-inch (19 mm) thick MDF
walls with extensive internal bracing for unshakable performance.
Three cast aluminum feet adorn the cabinet for superior coupling
to any surface.
REVEL PERFORMA C30
Owner’s Manual
5