Revel M20 - Manual (Page 4)

Figure 2. Transducer and con-
nection locations for the REVEL
PERFORMA M20 loudspeaker.
DESCRIPTION
The REVEL PERFORMA M20 loudspeaker features a transducer
complement (see Figure 2) of one 6.5-inch (165 mm) woofer and a
1-inch (25 mm) tweeter.
Combined with an individually-optimized crossover network, this
transducer arrangement results in a superior off-axis response that
provides a large “listening window” and an uncolored in-room
response, even in the presence of strong wall reflections.
WOOFER
The 6.5-inch (165 mm) woofer with an inverted magnesium-alloy
dome features:
• True pistonic operation for increased freedom from coloration.
• Shielded magnetic circuits to prevent interference with
video monitors.
• Butyl rubber surround for large, linear excursion capabilities.
• Vented center-pole piece for better cooling and low compression.
• Die-cast basket to eliminate resonances.
• 1.5-inch (38 mm) Kapton ® voice-coil former with flat, edge-
wound voice coil.
• 26-ounce (0.737 kg) motor system with flux shorting ring to
dramatically reduce modulation distortion.
REVEL PERFORMA M20
Owner’s Manual
4
+1 -1 0 +.5 -.5
Tweeter Level (dB)
Stand
Mounted Flush Mounted
Revel
Northridge, California
Made in U.S.A.
Serial Number
Placement
Compensation
(See Owner's Manual)
xxxx
REVEL PERFORMA
M20 Front
(without grille)
Woofer
Woofer Port
Tweeter
REVEL PERFORMA
M20 Rear
Tweeter
Level
Control Placement
Compensation
Control
Connectors