Revel M20 - Manual (Page 5)

TWEETER
The 1-inch (25 mm) tweeter with aluminum-alloy dome features:
• True pistonic operation for increased freedom from coloration.
• Underhung with copper-clad aluminum wire for low distortion.
• Ferrofluid for better power handling with reduced compression.
• Shielded magnetic circuits to prevent interference with
video monitors.
• Flux modulation ring for very low distortion
CROSSOVER NETWORK
Each REVEL PERFORMA M20 loudspeaker has an individually-
optimized crossover network with:
• A high-order crossover at 2.2 kHz to optimize the on- and off-
axis response of the system.
• Filter networks with carefully selected components for optimum
performance with vanishingly low coloration and distortion.
• External Placement Compensation Control for optimizing the
loudspeaker’s response for flush-mount, bookshelf, or stand-
mount applications.
• External Tweeter Level Control provides high-frequency com-
pensation for a variety of room environments.
CABINET
The cabinet is constructed of 1-inch (25 mm) thick MDF walls
with extensive internal bracing for unshakable performance.
A rounded front baffle is sculpted to reduce diffraction, and three
cast aluminum feet adorn the cabinet for superior coupling to any
surface. The wood-veneer cabinet comes in finishes of Cherry,
Sycamore, Rose, or Black Ash.
The optional REVEL PERFORMA PEDESTAL 1 is also available
from your Revel dealer. This stand is designed to optimize the
acoustical performance and enhance the appearance of the REVEL
PERFORMA M20 loudspeaker. It attaches securely to the loud-
speaker cabinet, and the loudspeaker feet attach to the base of the
stand to create an integrated and attractive appearance (also see
Installing Stands on page 8).
REVEL PERFORMA M20
Owner’s Manual
5