Revel M20 - Manual (Page 8)

Figure 5. Installing bars onto
the ‘T’ base for the REVEL
PERFORMA PEDESTAL 1.
Figure 6. Installing the top plate.
INSTALLING STANDS (OPTIONAL)
1. Using a Phillips screwdriver, remove the REVEL PERFORMA
M20 loudspeaker feet and screws (for later attachment to stand
base). Locate the parts bag (packed with the loudspeaker) that
contains spikes, lock nuts, covers, and a wrench. Set all parts aside.
2. Unpack a REVEL PERFORMA PEDESTAL 1 box. Start the
stand assembly by fastening three upright bars to the bottom ‘T’
base with the enclosed 1 ⁄ 4-20 x 1" flat head screws, as shown in
Figure 5.
3. Place the stand in its upright position. Install the top plate with
three 1 ⁄ 4-20 x 1" flat head screws, as shown in Figure 6.
REVEL PERFORMA M20
Owner’s Manual
8
‘T’ Base
(3) Bars
(3) 1⁄4-20 x 1"
Flat Head Screws
(Start All Screws
Before Tightening)
Top Plate
(3) 1⁄4-20 x 1"
Flat Head Screws
(Start All Screws
Before Tightening)