Revel M20 - Manual (Page 6)

WARNING
Figure 3. A REVEL
PERFORMA M20 loudspeaker
with its inner packing materials.
UNPACKING
IMPORTANT! To avoid injury, please use care during unpacking.
Always stand as straight as possible and use your leg muscles to lift
the REVEL PERFORMA M20 loudspeaker. Do not lift it while
bending from the waist.
Each REVEL PERFORMA M20 loudspeaker is packed in its own
carton. To unpack it, perform the following steps:
1. Place a REVEL PERFORMA M20 loudspeaker onto its side.
2. Open the bottom flaps. Stand the unit in the up position.
3. Open the top flaps. Take out the spike foot kit and set it aside.
Remove the top pad.
4. Lift the carton off the loudspeaker and set it aside, being careful
not to damage the cabinet.
5. Grasping the cabinet on the sides, lift it up and remove the bot-
tom pad. Use caution to avoid touching any of the transducers.
6. Repeat steps 1 through 5 for the other loudspeaker.
NOTE: Spikes can be installed as an option after determining final
speaker placement. Installation is similar to instructions shown in
Figure 7 on page 9.
REVEL PERFORMA M20
Owner’s Manual
6
+1
-1
0 +.5 -.5
Tweeter Le vel (dB) Stand
Mounted
Flush Mounted
Re vel Nor thridg e, Calif ornia
Made in U .S.A.
Serial Number
Placement
Compensation
(See Owner's Man ual)
xxxx
Top Pad
Bottom Pad
Spike Foot Kit
Warranty Card and
Owner’s Manual