Richter MNK-B Series - Manual (Page 21)

Series MNK-B, close-coupled design Page 21
9230-055-en Revision 09
TM 7345 Edition 10/2008
10 Assembly aids
10.1 Boring templates
Pump size Ident.-No.
MNK-B 80-50-160 9217-89-1095
MNK-B 25-25-125 9217-89-1094
MNK-B 50-32-125
MNK-B 25-25-160
9217-89-1096
MNK-B 50-32-160
MNK-B 50-32-200
MNK-B 65-40-200
MNK-B 80-50-200
10.2 Installation device for plain bearings
Pump size Ident. No.
MNK-B 25-25-125, 50-32-125 9237-89-1134
MNK-B 25-25-160, 50-32-160, 80-50-160 9237-89-1135
MNK-B 50-32-200, 65-40-200, 80-50-200 9237-89-1136
Product description:
Turning the handwheel exerts a uniform axial pressing force on the guide bushes and the plain bearings.
When the installation device is pressed in, no transverse forces can arise but merely longitudinal forces, i.e. canting
between the plain bearings and the plain bearing pedestral is not possible.
10.3 Pull-off device for plain bearing bushes
Pump size Ident. No.
MNK-B 25-25-125, 50-32-125 9237-89-1101
MNK-B 25-25-160, 50-32-160, 80-50-160 9237-89-1102
MNK-B 50-32-200, 65-40-200, 80-50-200 9237-89-1103
Product description
Turning the handle results in a larger diameter in the area of the squeezing rubber.
This means that tension arises between the pull-off device and the plain bearing bush.
This tension facilitates the dismantling of the plain bearing bush from the plain bearing pedestal.