Clarion DXZ825 - Manual (Page 14)

20
DXZ825
English
Operations Common to Each Mode
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗
The factory default setting is “8”. (Adjustment
level: 1 to 18)
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ a ] or [ d ] button to select “CON-
TRAST”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to adjust the contrast.
4. Press the [T] button to return to the previous
mode.
Setting the button illumination
∗
The factory default setting is “ILLM GREEN”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ a ] or [ d ] button and select
“KEY ILLUMI”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and select from
“ILLM GREEN” and “ILLM RED”.
4. Press the [T] button to return the previous
mode.
Switching the screen saver
∗
The factory default setting is “RANDOM”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ a ] or [ d ] button and select
“AUTO SS”.
3. Press the [ ] button.
4. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed to switch to “SS
RANDOM”.
“SS RANDOM” ↔ “SS Ptn3” ↔ “SS Ptn2” ↔
“SS Ptn1” ↔ “SS OFF”.
5. Press the [T] button to return the previous
mode.
Message display
When the unit is powered on or off, a message
is displayed. The user can turn this message
display ON or OFF.
∗
The factory default setting is “ON”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ a ] or [ d ] button to select “MES-
SAGE”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to set the message display ON
or OFF.
4. Press the [T] button to return to the previous
mode.
Setting the method for Ttitle scroll
Set how to scroll in CD-TEXT or MD.
∗
The factory default setting is “ON”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ a ] or [ d ] button and select
“AUTO SCROLL”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise and select “ON” or “OF”.
● ON:
To scroll automatically.
● OF:
To scroll just 1 time when the title was
changed or the title key was pressed.
4. Press the [T] button to return the previous
mode.