Clarion DXZ825 - Manual (Page 25)

DXZ825
31
English
INFO (Announcement)
In the INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
Digital Radio / DAB Operations
1. Perform the following operation depending
on the connected model.
Press and hold the [T] button for 1 second or longer.
2. Press the [ a ] or [ d ] button to select “INFO
SEL”, then press the [ ] button to enter
“INFO SEL” mode.
3. Press the [ a ] or [ d ] button to select an in-
formation item. You can select any of 6 items:
Travel ➜ Warning ➜ News ➜ Weather ➜
Event ➜ Special ➜ Travel ...
4. Perform the following operation depending
on the connected model.
INFORMATION item
ENGLISH Contents
Travel Transport flash
Warning Warning / Service
News News flash
Weather Area weather flash
Event Event announcement
Special Special event
● Setting the INFO standby mode
If you press and hold the [ I ] button for 1 second
or longer, “INFO” lights in the display and the
main unit is set into the INFO standby mode until
the selected announcement is broadcast. When
the selected announcement broadcast starts, the
announcement item appears in the display. If you
press and hold the [ I ] button for 1 second or
longer while the selected announcement broad-
cast is being received, the selected announce-
ment broadcast reception is cancelled and the
main unit goes into the INFO standby mode.
● Cancelling INFO standby mode
To cancel the INFO standby mode, press and
hold the [ I ] button for 1 second or longer.
● Information select
This is a function for selecting INFORMATION
ON or OFF in the Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
Turn the [ROTARY] knob clockwise or
counterclock wise to set the information item
for ON or OFF.
5. Press the [T] button to return to the previous
display.
Switching the PTY and INFO display
language
You can select one of 2 languages (English or
French) for the PTY and INFO shown in the dis-
play.
∗
The factory default setting is “ENGLISH”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ a ] or [ d ] button and select
“LANGUAGE”.
3. Press the [ ] button.
4. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select the desired language.
5. Press the [T] button to return to the previous
mode.
TA (Traffic Announcement)
In the TA standby mode, when a traffic announce-
ment broadcast starts, the traffic announcement
broadcast is received as top priority regardless of
the function mode. Traffic programme (TP) auto-
matic tuning is also possible.
∗
This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
DAB broadcast station being received has traffic
announcement programmes.
● Setting TA standby mode
If you press the [ I ] button when only “TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into TA standby mode until a
traffic announcement is broadcast. When a traf-
fic announcement broadcast starts, “TRA INFO”
appears in the display. If you press the [ I ] but-
ton while a traffic announcement broadcast is
being received, the traffic announcement broad-
cast reception is cancelled and the unit goes
into TA standby mode.
● Cancelling TA standby mode
With “TP” and “TA” lit in the display, press the [ I ]
button. The “TA” in the display goes off and TA
standby mode is cancelled.
∗
If “TP” is not lit, pressing [ I ] button searches for a
TP station.