Clarion DXZ825 - Manual (Page 22)

28
DXZ825
English
Selecting a sound field menu
1. Press the [A] button and select “DSF”. “DSF”
blinks in the display.
2. Press the [BND] button to select “BSC1” (ba-
sic-1) or “BSC2” (basic-2). “BSC1” or “BSC2”
is displayed in the function mode indication in
the display.
3. Press one of the [DIRECT] buttons and se-
lect the desired sound field menu.
∗
To select the user memory, press the
[BND] button to select “USR” and press
one of the [DIRECT] buttons.
Editing/storing a sound field menu
(User memory)
1. Select a sound field menu which you want to
edit on the basis of.
2. Press and hold the [T] button for 1 second or
longer.
3. Press the [ a ] or [ d ] button to select the
item to be adjusted.
There are “EFFECT”, “DELAY”, “REAR MIX”,
“REV.TIME” or “ROOM SIZE” and “HIGH” or
“LIVENESS” available for the items to be ad-
justed.
∗
For details on each adjustment item, refer to
the owner’s manual supplied with the
DPH910.
4. Turn the [ROTARY] knob clockwise or coun-
terclockwise to make the adjustment.
5. Repeat steps 3 to 4 to complete the adjust-
ment and press the [T] button.
6. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the edited
contents.
∗
You can give a title to the user memory. For
the inputting method of titles, refer to the sub-
section “Entering titles” in section “Opera-
tions common to each mode”.
Professional mode/VSE operations
Note:
• The adjustment made in professional mode is not
reflected in the adjustment in standard mode. On
the contrary, the adjustment made in standard
mode is not reflected in the adjustment in profes-
sional mode.
VSE effect ON/OFF
While the “VSE” indication is lit in the display,
the VSE effect is set to “ON”.
∗
The factory default setting is “ON”.
1. Press the [A] button and select “VSE”.
2. Press the [D] button. “VSE” in the display lit or
unlit.
∗
When “VSE” is unlit, the VSE effect is set to
OFF.
Note:
• If the VSE effect is set to OFF, the adjustment
made in “VSE operations” is not reflected in the
music source.
Selecting an VSE menu
1. Press the [A] button and select “VSE”.
2. Press the [BND] button to select “BASC” (ba-
sic). “BASC” is displayed in the function
mode indication in the display.
3. Press one of the [DIRECT] buttons and se-
lect the desired VSE menu.
∗
To select the user memory, press the [BND]
button to select “USR” and press one of the
[DIRECT] buttons.
Editing/storing an VSE menu (User
memory)
1. Select an VSE menu which you want to edit
on the basis of.
2. Press and hold the [T] button for 1 second or longer.
3. Press the [ a ] or [ d ] button to select the
item to be adjusted.
There are “DIFFUSE”, “CAR WIDTH” and
“CAR LENG” available for the items to be ad-
justed.
∗
For details on each adjustment item, refer to
the owner’s manual supplied with the
DPH910.
4. Turn the [ROTARY] knob clockwise or
counterclockwise to make the adjustment.
The adjustment range is from 1 to 10 for
each item.
5. Repeat steps 3 to 4 to complete the adjust-
ment and press the [T] button.
6. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the edited
contents.
∗
You can give a title to the user memory. For
the inputting method of titles, refer to the sub-
section “Entering titles” in section “Opera-
tions common to each mode”.
DSP Operations