Clarion DXZ825 - Manual (Page 8)

14
DXZ825
English
Setting the Beat EQ
This unit are provided with 5 types of sound tone ef-
fects stored in memory. Select the one you prefer.
∗
The factory default setting is “USER CUSTOM”.
Each time you press the [BEQ] button, the tone
effect changes in the following order:
“BASS BOOST” ➜ “IMPACT” ➜ “EXCITE” ➜
“USER CUSTOM” ➜ “TONE BYPASS” ➜
“BASS BOOST” ...
• BASS BOOST : bass emphasized
• IMPACT : bass and treble empha-
sized
• EXCITE : bass and treble empha-
sized mid de-emphasized
• USER CUSTOM : user custom
• TONE BYPASS : no sound effect
Adjusting the tone
Press the [A] button and select the item to ad-
just. Each time you press the [A] button, the
item changes in the following order:
● When “BASS BOOST” is set
“NON-FAD VOL” ➜ “BASS BOOST” ➜
“BALANCE” ➜ “FADER” ➜ Last function
mode.
● When “IMPACT” is set
“NON-FAD VOL” ➜ “IMPACT” ➜ “BAL-
ANCE” ➜ “FADER” ➜ Last function mode.
● When “EXCITE” is set
“NON-FAD VOL” ➜ “EXCITE” ➜ “BAL-
ANCE” ➜ “FADER” ➜ Last function mode.
● When “USER CUSTOM” is set
“NON-FAD VOL” ➜ “BASS <GAIN>” ➜ “MID
<GAIN>” ➜ “TREB<GAIN>” ➜ “BALANCE”
➜ “FADER” ➜ Last function mode.
● When “TONE BYPASS” is set
“NON-FAD VOL” ➜ “BALANCE” ➜ “FADER”
➜ Last function mode.
∗
Pressing the [BEQ] button for 1 second or longer
while in “USER CUSTOM” sets flat, and displays
a “BEQ FLAT” message.
Note:
• When the separately-sold digital sound processor
(DPH910) is used, the bass and treble tone ad-
justments cannot be made. To adjust the tone, re-
fer to the section “DSP Operations”.
Adjusting the non fader output
volume
You can adjust the volume output from the unit’s
non fader output terminal.
1. Press the [A] button and select “NON-FAD
VOL”.
2. Turning the [ROTARY] knob clockwise in-
creases the output volume; turning it counter-
clockwise decreases the output volume.
∗
The factory default setting is “0”. (Setting
range: –6 to 6)
3. When the adjustment is complete, press the
[A] button several times until the function
mode is reached.
Adjusting the bass
The bass gain, bass F (center frequency) and
bass Q can be adjusted as follows.
1. Press the [A] button and select “BASS
<GAIN>”.
2. Press the [ a ] or [ d ] button and select from
“BASS <GAIN>” ➜ “BASS <F 50>” ➜
“BASS <Q 1>” ➜ “BASS <GAIN>”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and adjust the gain,
the F (center frequency) and the Q.
BASS GAIN : –6 to 8 (The factory default
setting is “0”)
BASS F : 50Hz/80Hz/120Hz (The fac-
tory default setting is “50”)
BASS Q : 1/1.25/1.5/2 (The factory de-
fault setting is “1”)
4. When the adjustment is complete, press the
[A] button several times until the function
mode is reached.
Adjusting the MID
The MID gain, MID F (center frequency) and
MID Q can be adjusted as follows.
1. Press the [A] button and select “MID
<GAIN>“.
2. Press the [ a ] or [ d ] button and select from
“MID <GAIN>” ➜ “MID <F 1k>” ➜ “MID <Q
2>” ➜ “MID <GAIN>”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and adjust the gain,
the F (center frequency) and the Q.
MID GAIN : –6 to 6 (The factory default
setting is “0”)
Basic Operations