Soleus GPS Fit (SG100) - Manual (Page 4)

GPS Fit
CG12
5.2) Using Chronograph mode:
RUN mode and CHRONOGRAPH mode has the same timer counter. When the chronograph
is started or stopped in RUN mode, the same thing happens in Chronograph mode. They just
differ in the views. This mode is dedicated to chronograph, lap time, and distance travelled.
5.2.1) Press S7 from RUN mode to go to CHRO mode. The watch will momentarily
display CHRO and then GPS/INDOOR.
5.2.2) Press S1/S11 to select between GPS and INDOOR.
5.2.3) Press S5 to confirm selection. If you select INDOOR, you will have your exercise
without GPS data. If you select GPS, the watch will start searching for GPS signal;
display the battery level, remaining Memory, and the GPS GO screen.
5.2.4) Press S1 to Start or Stop.
5.2.5) Press S5 to take manual LAP. If AUTO LAP is set, the watch will take LAP
automatically based on the setting and there is a beep sound during taking of the
auto lap if ALERT is ON in the AUTO LAP setting.
5.2.6) Press S1 to Stop.
5.2.7) While the chronograph is stopped, press S5 to view your current data before
saving. Following are the views as you press S5:
o Stop / Chrono / Distance
o Calorie / Ave Pace / Max Pace
o Calorie / Ave Speed / Max Speed
5.2.8) Press and hold S1 or press S11 to save the exercise. The watch will display SAVE
FILE ## and will then go back to GPS GO screen.
Note: When the chronograph is stopped or reset, after 15 minutes if no key operation the
GPS will automatically turn OFF and return to time mode.
General Operations
The watch has the following main modes: Time, Run, Chronograph, Run Data, Alarm and Set
modes. Press S7 to scroll through these modes.
Watch reset:
The user can reset the watch by pressing and holding S1, S5, S7 and S11 together. All
segments will be ON, then EL backlight ON. The software code will be displayed and go to
Time mode.
EL backlight:
This watch has a Night mode function. Following are the options in SET mode and their
functions:
10 SECONDS – Press S11 will turn ON the Light for 10 seconds.
20 SECONDS – Press S11 will turn ON the Light for 20 seconds.
NIGHT ON – Light will continuously ON when GPS is ON and CHRONO is running from 5:00
pm to 7:00 am by default. However, Start (ON) time and END (OFF) Time for the NIGHT
function can be changed in Set mode.