Soleus GPS Fit (SG100) - Manual (Page 6)

GPS Fit
CG12
CONTRAST setting in TIME mode:
•
Press S5 while CONTRAST is blinking. Contrast percentage will start to blink.
• Press S1/S11 to change to your desired value. LCD Contrast range is from 10 to 100%.
• Press S5/S7 to exit to CONTRAST setting screen
CHIME Setting in TIME mode:
•
Press S5while CHIME is blinking. The watch will display CHIME ON.
• Press S1/S5 to change to CHIME OFF or OFF.
• Press S5/S7 to confirm and exit to CHIME setting screen
DATA mode
• Press S7 from CHRONO mode to enter DATA mode. The watch will momentarily display
DATA and then the latest data file. If there is no data available, it will display DATA - - - -.
• Press S1/S11 to scroll through the various data files.
• Press S5 to enter the selected data file. The watch will display the Start time/ End Time/
Distance.
• Press S1/S5 to forward view the details. Press S11 to view the previous detail.
• Following are the details when you press S1/S5:
o Start Time / End Time / Distance
o Chrono /Distance / Calorie
o Chrono / Ave Pace / Max Pace
o Chrono/ Ace Speed/ Max Speed
o Lap 1 / Lap time / Lap Distance
o Lap 2 / Lap time / Lap Distance
o Up to last Lap time/ Distance
o VIEW/ DEL / DELETE ALL sub menus ( press S1/S11 to select)
• Press S7 to exit
Deleting Data/ All Data:
• Enter data mode.
• Press S1/S11 to select data to delete.
• Press S5 to enter
• VIEW/ DEL / DELETE ALL sub menus will display after the last Lap data
• Or press and hold S5 for 2 seconds in data views and the watch will display the VIEW/
DEL/ DEL ALL sub menu.
• Press S1/ S11 to select
• Press S5 to enter
• Select DEL to delete selected data.
• Select DEL ALL to delete all data.
Data numbering system/ Legend:
Following is the data numbering system.
Sample data number: D04 03 0712 02 G
D04 – Total number of Files
03 –file number
07 – Month
12 – Day
1 – Time referred to Time 1, 2 if referred to Time 2
02 – File number of the day
G – Data with GPS, H for data without GPS