Soleus GPS Fit (SG100) - Manual (Page 7)

GPS Fit
CG12
ALARM mode
• Press S7 from DATA mode to enter ALARM mode. The watch will momentarily display
ALRM and then alarm 1. The watch has five alarms that can be set individually.
• Press S5 to view Alarm 1 to Alarm 5 and Chime. Press S1 to turn ON or OFF the selected
alarm or CHIME.
• Alarm will sound for 20 seconds during alarm time. Pressing any button will stop the sound
without the button function. When any 1 alarm is ON, Alarm icon will be displayed in TIME
mode.
Setting ALARM in ALARM mode:
• Press and hold S11 and the watch will display HOLD TO SET. AL-1 will start to blink.
• Press S1/S11 to toggle through Alarm 1 to alarm 5. The watch has 5 alarms which can be
set individually
• Press S5 to set the selected Alarm number. The HOUR digit will start to blink.
• Press S1/S11 to change the hour digit.
• Press S5 to confirm and set the MINUTE digit. The minute digit starts to blink.
• Press S1/S11 to change the minute digit.
• Press S5 to confirm and set the T1 or T2 setting. T1 or T2 starts to blink. The alarm time
will be referred to Time 1 or Time 2.
• Press S1/S11 to change setting
• Press S5 to confirm. Alarm ON or OFF will start to blink.
• Press S1/S11 to change the setting.
• Press S5 to confirm and go back to ALARM 1 setting screen
• Press S7 to exit
SET mode
Press S7 from ALARM mode to SET mode. 1.5 seconds later the watch will display the setting
options. The following sequence are as follows; AUTO LAP, TIME, UNIT, USER, NIGHT,
CONTRAST, CHIME and ALARM. Press S1/S11 to scroll through these parameters. Press S5
to enter selected option to set. Press S7 to exit setting to Time mode.
Setting the Auto Lap:
•
Press S5 while AUTO LAP is blinking. Auto lap 1 will start to blink.
• Press S1/S11 to change the setting. Auto lap preset settings are: off, 0.4, 1, 2, 3, 4, and
5 KM.
• Press S5 to confirm and set ALERT ON or OFF.
• Press S1/S11 to change the setting. There is a beep sound and EL on for 10 sec every
auto lap taking when ALERT is set to ON.
• Press S5 to confirm setting and go back to Auto lap setting screen.
Note: Alert sub-mode. When alert is set to ON, there will be a beep sound during taking auto
lap. When it is set to OFF, there is no beep sound.
SETTING THE TIME:
TIME 1/ Time 2 setting:
•
Press S5 while TIME is blinking. The watch will display T1 or T2.
• Press S1/S11 to choose between T1 or T2 to set.
• Press S5 to set the selected time (T1 or T2). The watch will display GPS or MANUAL.
• Press S1/S11 to select GPS or MANUAL. You have two options in setting the watch,
GPS or MANUAL. In manual setting, you can manually set the time. If you select the
GPS option, the watch will be automatically set based on the data and time data from
GPS satellites.
GPS setting:
o While GPS is blinking, Press S5 to set the TIME ZONE.
o Press S1 or S11 to change the time zone. There are 36 city codes to choose from.
o Press S5 to confirm and set DST ON /OFF.
o Press S1/S11 to change setting.
o Press S5 to confirm and set 12H/ 24H format setting.
o Press S1/S11 to change 12H/24H format setting.
o Press S5 to confirm and set M-D or D- M format setting
o Press S1/ S11 to change setting
o Press S5 to enter and go back to TIME setting screen.
MANUAL setting:
o While MANUAL is blinking, Press S5 to enter.
o Set the HOUR by pressing S1 or S11 and then press S5 to enter.
o Set the Minute by pressing S1 or S11 and then press S5 to enter.
o Set the SECOND by pressing S1 or S11 and then press S5 to enter.
o Set the YEAR by pressing S1 or S11 and then press S5 to enter.
o Set the MONTH by pressing S1 or S11 and then press S5 to enter.
o Set the DATE by pressing S1 or S11 and then press S5 to enter.
o Set the 12/24H by pressing S1 or S11 and then press S5 to enter.
o Set M-D or D- M format setting by pressing S1/S11 and then press S5 to enter.
o Press S5 to enter and go back to TIME setting screen.
Setting the UNIT:
•
Press S5 while UNIT is blinking. KM will start to blink.
•
Press S1/S11 to change the unit.
•
Press S5/S7 to confirm setting and go back to UNIT setting screen.