Syba SB-ATA8212-133R - Manual (Page 5)

RAIDExpress 133 RAID USER MANUAL
5
Quick Start
This section leads you to quickly establish your RAID system with default settings.
The default settings can meet most people ’s requirements. If you need more
advanced optimal, please refer to Setup Utility on page 14 to achieve your goal.
Unpack your RAIDExpress 133 Card package
When you unpack your RAIDExpress 133 card package, you can see the following
items.
l RAIDExpress 133 card.
l RAIDExpress 133 manual.
l RAIDExpress 133 card software CD.
l Two 80-wire/40-pin Ultra ATA/133 hard drive cables.
I f you lack anything mentioned above, please contact your distributor to ask for
remedy.
Warning: In order to prevent any data loss resulting from
inappropriate operation, please backup data before you start to
install your system.
!
RAIDExpress 133 RAID USER MANUAL
6
Install the RAIDExpress 133 Card
This RAIDExpress 133 card meets the PCI v2.2 standard and can be easily installed
under 32-bit PCI slots of different PC systems. Please follow the following procedures
to install it.
1. Remove the case of the PC system.
2. Remove the inside slot cover of any available 32-bit PCI slot.
3. Install the RAIDExpress 133 card in this open slot.
4. Attach Ultra ATA/133 hard drives to the RAIDExpress 133 card.