TeachLogic Titan Neo - Manual (Page 14)

2
14
Titan Neo
Titan Neo COMPONENTS & OPERATION
1. Adjust volume to desired level.
2. To skip forward a whole track press the next track button (>>|). To skip
backwards a whole track, press the previous track button (|<<). To search
through tracks, press and hold either of these buttons until you reach the
desired point in the track.
3. Repeat allows repeating of single songs or all songs. Shuffle plays tracks in
a random order.
4. To program specific tracks for playback press the track program button.
Select the song you wish to program on the disc using the next track (>>|)
and previous track buttons (|<<). Press repeat to enter the track into the
program. Repeat as necessary. To playback programmed tracks press the
play/pause button. Note: program will be reset whenever the track program
button is pressed.
5. For use with MP3 discs you can select folders of music on the CD. Press
the folder button and use the next track (>>|) and previous track buttons
(|<<) to select your desired folder. Note: this function searches the disc in
alphanumeric order.
Bluetooth pairing
1. Turn Bluetooth “on”, turning volume/power switch clockwise to 12 o’clock.
2. The receiver will highlight Bluetooth Logo indication power on.
3. PWR indicator will light.
4. Go to Settings on your Bluetooth device. Select Bluetooth from menu,
Search for "devices", Select "Portable PA". Receiver and transmitter will
begin pairing process.
5. LINK indicator will illuminate when pairing is complete.
Bluetooth
AF LINK OFF MAX PWR
BT-800 Bluetooth Wireless Receiver Module
One BT-800 Bluetooth receiver module can be installed in one of the two
receiver slots at the top of the Titan Neo.
Operation
LCD Display: Bluetooth Readout
Receiver Module: “on/off” and Master Gain
Power Indicator
Transmission link Indicator
Audio input Indicator 1
2
3
4
5
2 1
3 4 5