TeachLogic Titan Neo - Manual (Page 19)

19
Owner’s Manual
Titan Neo COMPONENTS & OPERATION
Remote Controller Functions
EJECT Press to stop playing and eject the disc.
can memorize a set of tracks for playback.
To Program a set of tracks:
1) Insert a disk into the CD player, press key one time.
2) Enter the folder and track number then press to confirm selection.
For example: To program track 23 then 42 then 19, Press 0 and 1 for
folder, the LCD will display “01”. Then press 2 and 3 for track number,
the LCD will display “23”. Then press to confirm selection, the LCD
will display “01 23:01”. This is Folder number 1, track number 23, first
selection to play.
Then press 4 and 2 for track number, the LCD will display “42 :02” for
track number and selection number 2. Then press to confirm selec-
tion, the LCD will display “01 42:02”.
This is Folder number 1, track number 42, second selection to play.
Then press 1 and 9 for track number, the LCD will display “19 :03” for
track number and selection number 3. Then press to confirm selec-
tion, the LCD will display “01 19:03”.
This is Folder number 1, track number 19, third selection to play.
3) Repeat this process until all desired tracks have been memorized.
4) When all selections have been memorized press
A random selection of tracks will play. Press and the LCD will display
“SHUFFLE”.
REPEAT MODE. While playing a CD, press once, the LCD will display
“REPEAT ALL”. Repeat All will repeat all tracks one time. Press again,
the LCD will display “REPEAT 1”. Repeat 1 will repeat all songs in that folder.
Press a third time, all repeats will be cancelled.
PROG
PROG
RAN RAN
REP
REP
REP
REP
Replacing Remote Battery
1. Pull battery clip
2. Insert battery
3. Replace clip
The battery for the remote is (model CR2025 3V).