Installation, Selecting the cooking plates – T-Fal Avanté Sandwich and Waffle Maker User Manual

Page 5

Advertising
background image

English

1

2

Place the appliance on a flat, stable, heat-resistant surface : do not use it
on a soft base.

Do not place the appliance on or near slippery or hot surface; never leave
the cord hanging over a heat source (cooking plates, gas cooker...).

Open the appliance.
Remove any packaging, stickers or accessories inside and outside the
appliance.

Installation

Depending on model, you can use different sets of
plates.

• To remove the plates :

Press on the release button while holding the
handles situated on each side of the plates.

• To put the plates back in position :

Slide each plate in at an angle; insert the tabs
found on the edge of the plate into the slots found
on the base unit.
Push down on the plate to lock it.

Selecting the cooking plates

Thank you for purchasing this T-FAL appliance. Regardless of which
model you purchased, please read the instructions carefully and keep
them on hand. This product has been designed for domestic use only.

For any commercial use, inappropriate use or failure to comply with the
instructions, the manufacturer accepts no responsibility and the
guarantee will not apply.

On first use, wipe the plates with a kitchen towel that has been dampened
with cooking oil. Remove excess residue with a clean kitchen towel.To help
preserve the non stick lining re-oil the plates occasionally.

Ensure that the appliance is cool and unplugged before changing the
plates.

Advertising