Craftsman 0220 - Manual (Page 10)

0
Patent Advisory NATM Compliance
Tire and loading Information
7
8
Always check tire pressure to ensure optimum life and performance from your tires.
The tires that came with your trailer should have a tire pressure of 80 psi. Sears,
Roebuck and Co. cannot be held responsible for damages caused by uneven tread
wear and blow outs from an under-inflated or over-inflated tire.
The Trailer and load should never exceed the Gross Vehicle Weight (GVW).
Whenever loading the trailer, always check to see if you’re within this limit. See the
section on Loading the Trailer for information regarding how to check .
This sticker also displays your Vehicle Identification Number (VIN) in the bottom,
left-hand corner.
Your trailer is in compliance with the
guidelines of the National Association of
Trailer Manufacturers. Your trailer has its
own unique number. Note: This is not
your Vehicle Identification Number (VIN).
Re-order #1014245
No re-orders
9
This sticker displays the various patents
applicable to the trailer.
No re-orders
ball and Hitch Size
10
Your new trailer comes with a 2-inch coupler. The ball
on the tow vehicle must be 2 inches in diameter. An
incorrect ball size can cause the separation of the trailer
from the tow vehicle resulting in possible property
damage, serious injury and death.
Re-order #1013499