Craftsman 0220 - Manual (Page 23)


5.2.1.6 Uncoupling the Trailer
Follow these steps to uncouple your ball hitch trailer from the tow vehicle:
1. Remove the load from the trailer.
2. Block trailer tires to prevent the trailer from rolling.
3. Place wood or concrete blocks under the coupler for support.
4. Disconnect the electrical connector.
5. Disconnect the safety chains from the tow vehicle.
6. Unlock the coupler and pull the safety latch upward to a vertical position and
lift the trailer off the ball.
From Trailer
From Tow Vehicle
From Trailer From Tow Vehicle
WARNING
Check the connection periodically to ensure tail and break lights
function properly. Failure to follow this warning could result in
property damage, personal injury and death.
Note: If your connector does not look like the one pictured, you need to purchase
an adapter.
Unlock