Quick reference, Quick reference – how to start projection – Canon SX6 User Manual
Page 2
2
Quick Reference – How to start projection
Computer
1.
Install the projector.
P28-29
z
Install the projector at the desired distance from the screen.
z
Install batteries in the remote control (P26)
2.
Connect the projector.
P32-34
z
Connect the projector and the computer with a cable.
3.
Turn on the projector.
P35-38
z
Connect the power cord and turn on the projector.
z
Adjust the height of the projecting image (P38).
z
Select a display language when turning on the projector for the first time (P36).
4.
Set up the computer.
P39-40
z
Turn on the computer and set the resolution.
5.
Select the input signal by pressing the
button.
P43-45
z
Select an appropriate input signal in accord with the signal from the computer.
6.
Press the
button.
P41
z
Adjust the input signal, focusing, keystone distortion, etc. automatically with the
auto setup function.
7.
Press the
button.
P49
z
Optimize the input signal with the auto PC function (Skip this step if the projector is
projecting an image properly.)
8.
Select the image mode with the
button.
P50-51
z
Select an appropriate image mode for projection.
z
Specify the aspect ratio or display area in the [Aspect] menu as required (P52, 78).
9.
Start the presentation.
P66-71
z
Set the useful functions available during the presentation from the remote control.
Turn off the projector
P53-54
z
Turn off the projector and unplug the power cord.
Finishing the projection...