Canon SX6 - Manual (Page 34)

34
PROJECTIN
G AN IMAGE
FROM TH
E COMPUT
ER
Connecting to an External Monitor
You can display an image from the projec-
tor to an external monitor.
Connecting to Audio Terminals
Connect an audio cable between the pro-
jector and computer if you want to use the
projectors speaker.
z You can connect one external monitor.
The multi-monitor display is not sup-
ported.
z The projected image is displayed on
the external monitor.
z You cannot output the input signal to
the external monitor if it is DIGITAL
PC.
VGA cable
To monitor output terminal
(mini D-sub 15-pin terminal)
Image input terminal
(mini D-sub 15-pin terminal)
Commercial VGA cable
External monitor
Projector
z Use an audio cable without a built-in
resistor. Using an audio cable with a
built-in resistor turns down the sound.
z The built-in speaker is monaural.
z The speaker plays the sound from the
equipment which the audio cable is
connected to regardless of the image
input signal.
Audio cable
AUDIO OUT terminal
AUDIO IN terminal
Commercial Audio cable
Computer
Projector