Canon SX6 - Manual (Page 83)

83
SE
TTING
UP FU
NCTIO
NS FROM MEN
US
Setting Display Status from the Display Settings Menu
Adjusting the Number of Horizontal Pixels
[Horizontal pixels]
You can adjust the number of the pixels in the
horizontal direction if the length of the screen is
too long or too short in the horizontal direction.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Number of Vertical Pixels
[Vertical pixels]
You can adjust the number of the pixels in the
vertical direction if the length of the screen is too
long or too short in the vertical direction.
T
T
T
Press the [MENU] button when you finish.
Display settings
Input signal settings
Horizontal pixels
Increases the number of pixels in
the horizontal direction.
Decreases the number of pixels in
the horizontal direction.
z Perform this adjustment if the auto PC
adjustment function cannot adjust the
project image correctly.
z The setting is recorded for [ANALOG
PC-1] and [ANALOG PC-2] sepa-
rately.
ANALOG PC
>
<
Display settings
Input signal settings
Vertical pixels
Increases the number of pixels in
the vertical direction.
Decreases the number of pixels in
the vertical direction.
z Perform this adjustment if the auto PC
adjustment function cannot adjust the
project image correctly.
z The setting is recorded for [ANALOG
PC-1] and [ANALOG PC-2] sepa-
rately.
ANALOG PC
>
<