Wildview STC-TGL-2IR - Manual (Page 19)

STC-TGL2IR
www.wildviewcam.com Toll Free 888-304-6125 19
• Follow the instructions shown on screen from your
PC to completely install the driver and application
program.
• If the existing DirectX version on your PC is lower
than version 8, and if you have problems viewing the
image with the standard software provided by
Microsoft, then you should install DirectX 8
• Restart windows.
• Turn off the camera
• Connect your camera to the PC by the USB cable,
the PC will recognize the new device and set up the
configuration of the PC automatically. Front LCD on
your camera will show the word “USb”.
NOTE: Windows 98 users must install camera driver
prior to connecting the USB cable.