Wildview STC-TGL-2IR - Manual (Page 21)

STC-TGL2IR
www.wildviewcam.com Toll Free 888-304-6125 21
Saving and Deleting images
SAVING IMAGES
To save images on to your PC, simply copy and paste, or
drag and drop from the SDRAM memory to your PC desk
top.
DELETING IMAGES
There are two ways to delete the images from the
internal SDRAM memory.
1. After you down load the image onto your desk top,
you can delete the image in the SDRAM: Unplug the
USB Cable from camera. Slide the power switch to
PIR position. LCD screen will display the number of
images captured in the memory.
o Delete One picture:
a. Press [SET] button to enter delete setting.
Display will show “ESC”
b. Press [UP] or [DN] to select d-ONE (delete
one)
c. Press [SET] to delete the image. Press [UP]